 |
|
|
|
|
Introduction:
We have RF and microwave processing experience, we fully understand your PCB's request. Our engineers studied a variety of RF composite materials, know each performance and processing characteristics, which is the basic foundation of good RF microwave processing. Our material suppliers TACONIC have fast delivery time and quick response service prototype and production requirements, increase your speed to market and competitiveness. There are machining RF and microwave good experience, we can process all kinds of PTFE and other materials
Sufficient stock:
We have sufficient rogers material raw as follow:
TLY-5A TLY-5 TLY-3 HT1.5 TLX-0 TLX-9 TLX-8 TLX-7 TLX-6 TLC-27 TLE-95 TLC-30 TPG-30 TLG-30 RF-30 TSM-30 TLC-32 TPG32 TLG-32 TLG-34 TPG35 TLG-35 RF-35 RF-35A RF-35P RF-41 RF-43 RF-45 RF-60A CER-10
So we can do pcb circuit board with your detail requirements in the case of you send us gerber files or any other files
Product Details:
Payment & Shipping Terms:
|
| Color: | Green | Material: | Rogers Material |
|---|---|---|---|
| Layer: | 4 Layer | Board Size: | 12*12cm |
| Copper Thinknes: | 1 Oz | Min Line Width: | 5 Mil |
| Min Line Space: | 5 Mil | Surface Finish: | Gold Plating |
| Name: | Rogers 4350B Pcb | ||
| High Light: | Pcb Board Prototype,Pcb Design And Fabrication |
||
High TG Fr4 UL 94v-0 Rohs Rogers Ro 4350B PCB RFID With Microwave
Quick Detail :
1. Type : Pcb
2. Material : Rogers
3. Layer : 4
4. Products Size : 12*12cm
5. Permittivity : 3
6. Surface finish : Gold Plating
Features:
1. Rogers pcb multilayer pcb with high frequency can improvide the products quality ,with high techolonogy treatment improve the life cycle of the products .
2. Immersion gold surface finish make the pcb 's conductive performance enhancements.
3. Multilayer pcb design ,the precision of the pcb improves much more better .
4. Low dielectric : 3 dielectric conductivity much more precision .
Description :
RO4350B™ materials are proprietary woven glass reinforced hydrocarbon/ceramics with electrical performance close to PTFE/woven glass and the manufacturability of epoxy/ glass.
Providing tight control on dielectric constant and low loss while utilizing the same processing method as standard epoxy/glass, RO4350B is available at a fraction of the cost of conventional microwave laminates. No special through-hole treatments or handling procedures are required as with PTFE based microwave materials.
RO4350B materials are UL 94V-0 rated for active devices and high power RF designs.
Typical Applications
Production Description :
| XCE PCB technical specifications | ||
| Annual stock Material | Rogers,Taconic,Arton,Isola,F4B,TP-2.FR-4,High TG,Halogen free | |
| Layer No. | 1~16 | |
| Min board thickness |
2 layer0.2mm 4 layer0.4mm 6 layer 0.6mm 8 layer 0.8mm 10 layer 1.0mm |
|
| Max panel size | 508*610mm | |
| Board thickness tolerance | T≥0.8mm±8%.,T<0.8mm±5% | |
| Wall hole copper thickness | >0.025mm(1mil) | |
| Finished hole | 0.2mm-6.3mm | |
| Min line width | 4mil/4mil(0.1/0.1mm) | |
| Min bonding pad space | 0.1mm(4mil) | |
| PTH aperture tolerance | ±0.075mm(3mil) | |
| NPTH aperture tolerance | ±0.05mm(2mil) | |
| Hole site deviation | ±0.05mm(2mil) | |
| Profile tolerance | ±0.10mm(4mil) | |
| Board bend&warp | ≤0.7% | |
| Insulation resistance | >1012Ωnormal | |
| Through-hole resistance | <300Ωnormal | |
| Electric strength | >1.3kv/mm | |
| Current breakdown | 10A | |
| Peel strength | 1.4N/mm | |
| Soldmask regidity | >6H | |
| Thermal stress | 288℃20Sec | |
| Testing voltage | 50-300V | |
| Min buried blind via | 0.2mm(8mil) | |
| Outer copper thickness | 1oz-5oz | |
| Inner cooper thickness | 1/2 oz-4oz | |
| Aspect ratio | 8:1 | |
| SMT min green oil width | 0.08mm | |
| Min green oil open window | 0.05mm | |
| Insulation layer thickless | 0.075mm-5mm | |
| Taphole aperture | 0.2mm-0.6mm | |
| Special technology | Indepedance,Blind buried via,thick gold,aluminum PCB | |
| Surface finish | HASL,Lead free HASL,Immersion Gold, Immersion Tin, Immersion Silver,OSP ,ENIG ,Golden finger,Blue glue,Gold plating | |
Competitive Advantage:
1) With UL,ROHS,ISO,IPC
2).Lead time:3-10 working days
3)Competitive price best quality
4).Rich 20 years experience in High Tg Multilayer PCB .
What Information customer need to provide for quotation ?
1. PCB Gerber files ,protel,powerpcb,Autocad,etc.
2. BOM list for PCB assembly.
3. Send us your sample PCB or PCBA.
4. OEM is acceptable.
