Rigid flex PCB have been used in the military and aerospace industries for more than 20 years. In most rigid flex circuit boards, the circuitry consists of multiple flexible circuit inner layers selectively attached together using an epoxy pre-preg bonding film, similar to a multilayer flexible circuit. However, a multilayer rigid flex circuit incorporates a board externally, internally or both as needed to accomplish the design.
Rigid flex PCB combine the best of both rigid boards and flexible circuits integrated together into one circuit. The two-in-one circuit is interconnected through plated thru holes. Rigid flex circuits provide higher component density and better quality control. Designs are rigid where extra support is needed and flexible around corners and areas requiring extra space.
Flex and Rigid-Flex applications also provide increased reliability. Mean time between failure rates (MTBF) typically exceed those of standard PCB sets with discrete wires and connectors, often becoming the choice of companies and engineers alike for its dependable and consistent performance.
Flexible Printed Circuit Boards with 8 layers rigid PCB
Single-Sided Flexible with rigid PCB board up to 6 layer
Double-Sided Flexible Printed Circuit Boards with 4 layer to 12 layer rigid pcb
Multilayer Flexible Printed Circuit Boards with multilayer rigid PCB
Payment & Shipping Terms:
custom printed circuit boards,
Half Hole HF Rogers Custom PCB Circuit Boards With Blue Solder Mask
|Board thickness: 0.8mm|
|Copper THK: 1oz|
|Min line space and width: 5mil|
|Base material: Rogers|
|Board thickness tolerance||T≥0.8mm±8%,T＜0.8mm±5%|
|Wall hole copper thickness||＞0.025mm(1mil)|
|Min line width||4mil/4mil(0.1/0.1mm)|
|Min bonding pad space||0.1mm(4mil)|
|PTH aperture tolerance||±0.075mm(3mil)|
|NPTH aperture tolerance||±0.05mm(2mil)|
|Hole site deviation||±0.05mm(2mil)|
|Min buried blind via||0.2mm(8mil)|
|Outer cooper thickness||1oz-5oz|
|Inner cooper thickness||1/2 oz-4oz|
High frequency telecom.high speed transmission high security.
High transmission quality.high memory transaction
Single.double Sided Teflon PCB
Conductor width control: ±0.02mm
Hole wall copper ≥ 20μм
Thermal stress 288°C.10sec.
Profile:punching or routing.tolerance ±0.10.0-0.13mm
Final product thickness 0.5,0.8,1.0,1.2,1.6mm
Base copper thickness Normal 0.5 1.0 OZ
Solder Mask Taiyo PSR4000.Tamura DSR2200
Solder mask thickness on tracks 20-30 μм
1, communication industry
2, medical equipments
3, consumer electronics
4, automobile industry
Competitive price with superior quality and stable reliability.
On-time delivery for sample, quick-turn, pilot run and large volumes.
Professional technical supports and prompt response to customers’ requests.
Logistics supports, various choice of shipping method, UPS, DHL, Fedex, sea/air cargoes.
Flexible payment choice, T/T, L/C and so on.