 |
|
|
|
|
Introduction:Rogers high frequency pcb widely used in the area of high technologies like communication device,Electronics,Aerospace,Military industry and so on. we have accumulated abandunt experiences in the line of high frequency microwave business for which widely apply to power divider,combiner,power amplifier,line amplifier,base station,RF antena,4G antena etc.
Sufficient stock:
We have sufficient rogers material raw as follow:RO4003C、RO4350B、RO4360、RO4533、RO4535、RO4730、RO4232、RO4233、RO3003、RO3006、RO3010、RO3035、RO3203、RO3206、RO3210、RO3730、RO5780、RO5880、RO6002、RO3202、RO6006,Frequently-used is 4003C,4350B,5880
So we can do pcb circuit board with your detail requirements in the case of you send us gerber files or any other files
Product Details:
Payment & Shipping Terms:
|
| High Light: | fr4 circuit board,Custom Printed Circuit Board |
||
|---|---|---|---|
Multilayer Hi Frequency PCB FR4 Impedance Printed Circuit Board
Specification:
Impedance means at a certain frequency, electronic devices transmission signal line, relative to a reference layer, high-frequency signals or electromagnetic wave by resistance during propagation is called the characteristic impedance, it is actually the electrical impedance, inductance resistance, capacitance resistance etc.
| Model:XCEF | Board size:8*9cm |
| Origin:China | Material:FR4 |
| Layer:2 | Rigid printed circuit board |
Parameter:
|
Finish Plating |
Hasl lead free |
|
Copper THK |
1oz |
|
Trace/Space Width |
8 Mils or Greater |
|
Drill Clearance |
0.1mm(laser drilling) |
|
Plated Slots |
0.036 or Greater |
|
Smallest Hole |
0.1mm or Greater |
| Test Jig |
One-off cost |
|
Tooling |
Yes |
|
Soldermask Type |
LPI Glossy, LPI-Matte, SR1000 |
|
Soldermask Color |
Green, Red, Blue, Black, White, Yellow, |
|
Legend Color |
White, Yellow, Black, Red, Blue |
|
CNC Route Point |
Any |
|
Minimum Route Width |
0.031” |
|
Scoring |
Straight Lines, Jump Scoring, Panel Edge to Edge, CNC* |
|
Body Gold |
HARD*, IMMERSION* (up to 50 MICRON GOLD) |
|
Data File Format |
Gerber 274x with embedder aperture |
|
Fab. Drawing Format |
DXF, HPGL, DWG, PDF, Gerber |
|
E.T Testing |
Flying Probe, Single Sided, 1up Plate, Clampshell, Net List |
|
Counter Sink / Counter Bore |
Availiable up to 0.250 Diameter |
Service:
Customer question:
1) What is the single line impedance & impedance differential & differential impedance. Impedance more smaller more better?
2) impedance 80 +/- 10% ,what's mean of "+/- 10%" ,is tolerance? This range is the bigger the better, or the smaller the better?
Our answer:
1) The single line is a line impedance ,differential = differential refers to the impedance of two parallel lines. Impedance values depend on the performance of electronic components.
2) +/- 10% means tolerance. The smaller tolerance on behalf of the higher requirements, making tecnology more harder
