 |
|
|
|
|
Introduction:Rogers high frequency pcb widely used in the area of high technologies like communication device,Electronics,Aerospace,Military industry and so on. we have accumulated abandunt experiences in the line of high frequency microwave business for which widely apply to power divider,combiner,power amplifier,line amplifier,base station,RF antena,4G antena etc.
Sufficient stock:
We have sufficient rogers material raw as follow:RO4003C、RO4350B、RO4360、RO4533、RO4535、RO4730、RO4232、RO4233、RO3003、RO3006、RO3010、RO3035、RO3203、RO3206、RO3210、RO3730、RO5780、RO5880、RO6002、RO3202、RO6006,Frequently-used is 4003C,4350B,5880
So we can do pcb circuit board with your detail requirements in the case of you send us gerber files or any other files
Product Details:
Payment & Shipping Terms:
|
| Material: | High Frequency Fr4 | Layer Of Number: | 6 Layer |
|---|---|---|---|
| Solder Mask: | Green | Copper Thk: | 1OZ |
| Color: | Green | Origin: | Shenzhen |
| High Light: | pcb manufacturing process,fr4 circuit board |
||
High Frequency Multilayer FR4 PCB Printed Circuit Board Fabrication
Specification:
High frequency FR4 material raw mixed compression with rogers4003c,reduce your costing with high quality production.Immersion gold 1-3 mil,3-8mil is avaliable.More than 4 layers, we call it multilayer pcb, PCB can be divided into single layer, double layer and multilayer
| Model:XCEF | Board size:16*9cm |
| Origin:China | Material:FR4 Rogers4003C |
| Layer:6 | Rigid printed circuit board |
Parameter:
|
Annular Ring |
5 mil/side or Greater (Min. Design) |
|
Finish Plating |
Immersion Gold |
|
Copper THK |
1oz |
|
Trace/Space Width |
8 Mils or Greater |
|
Drill Clearance |
0.1mm(laser drilling) |
|
Plated Slots |
0.036 or Greater |
|
Smallest Hole |
0.1mm or Greater |
| Test Jig |
One-off cost |
|
Tooling |
Yes |
|
Soldermask Type |
LPI Glossy, LPI-Matte, SR1000 |
|
Soldermask Color |
Green, Red, Blue, Black, White, Yellow, |
|
Legend Color |
White, Yellow, Black, Red, Blue |
|
CNC Route Point |
Any |
|
Minimum Route Width |
0.031” |
|
Scoring |
Straight Lines, Jump Scoring, Panel Edge to Edge, CNC* |
|
Body Gold |
HARD*, IMMERSION* (up to 50 MICRON GOLD) |
|
Data File Format |
Gerber 274x with embedder aperture |
|
Fab. Drawing Format |
DXF, HPGL, DWG, PDF, Gerber |
|
E.T Testing |
Flying Probe, Single Sided, 1up Plate, Clampshell, Net List |
|
Counter Sink / Counter Bore |
Availiable up to 0.250 Diameter |
Description:
Xinchenger Electronics have 12 years PCB production experience.
We have 6 Years high frequency pcb production experience
We are certified by ISO13485, TS16949, ULE332411, ISO14001, ISO9001
70% of our customers are from Europe and North America
We use very good material, such as KB, Shengyi, etc
100% of our prodcuts are tested and 100% pass before delivery
Fast samples for your test
