RF PCB introduction:
RF is Radio Frequency, referring to the radio, a high-frequency signal.
For performance index of PCB, it can be an ordinary FR4 epoxy glass fiber and also Teflon and other dedicated microwave substrates.
RF board standards:
1,In the design of miniwatt RF PCB, main material is standard FR4 (Good insulation characteristics
uniform material, dielectric constant ε = 4,10%).
2,In the RF PCB, every component should compact configuration to ensure that the shortest connection
between the every component.
3, For a mixed-signal PCB, RF and analog section should stay away from digital part
(This distance is usually more than 2cm, at least 1cm), the digital part of the ground should be
separated from the RF part.
4, To choose the components working in high frequency environment should use of surface-mount component as far as possible. Because the surface-mount component is small volume generally and the pin of component is very short.
Payment & Shipping Terms:
|Product Name:||Taconic PCB||Layer Of Number:||2|
pcb printed circuit board,
Making Printed Circuit Boards
Satellite Broadcast Radio Transmission Taconic PCB Circuit Board Low Loss Laminate
|Board size: 14*12cm|
|Surface finish: immersion gold|
|Copper thickness: 1OZ|
|Working temperature: -100-+150℃|
|XCE PCB technical specifications|
|Annual stock Material||Rogers,Taconic,Arton,Isola,F4B,TP-2.FR-4,High TG,Halogen free|
|Min board thickness||
6 layer 0.6mm
8 layer 0.8mm
10 layer 1.0mm
|Max panel size||508*610mm|
|Board thickness tolerance||T≥0.8mm±8%.,T<0.8mm±5%|
|Wall hole copper thickness||>0.025mm(1mil)|
|Min line width||4mil/4mil(0.1/0.1mm)|
|Min bonding pad space||0.1mm(4mil)|
|PTH aperture tolerance||±0.075mm(3mil)|
|NPTH aperture tolerance||±0.05mm(2mil)|
|Hole site deviation||±0.05mm(2mil)|
|Min buried blind via||0.2mm(8mil)|
|Outer copper thickness||1oz-5oz|
|Inner cooper thickness||1/2 oz-4oz|
|SMT min green oil width||0.08mm|
|Min green oil open window||0.05mm|
|Insulation layer thickless||0.075mm-5mm|
|Special technology||Indepedance,Blind buried via,thick gold,aluminum PCB|
|Surface finish||HASL,Lead free HASL,Immersion Gold, Immersion Tin, Immersion Silver,OSP ,ENIG ,Golden finger,Blue glue,Gold plating|
Specialized in high frequency PCB, double-sided multi-layer PCB manufacturer,
maximum processing layers 28 layers, the company has a full range of domestic and imported
high frequency material(Rogers ROGERS, TACONIC series, high frequency microwave PTFE circuit
boards, Teflon Teflon, PTFE circuit boards, dielectric constant ranging from 2.2 10.6), to provide quality
and efficient products for you