 |
|
|
|
|
Introduction:
We have RF and microwave processing experience, we fully understand your PCB's request. Our engineers studied a variety of RF composite materials, know each performance and processing characteristics, which is the basic foundation of good RF microwave processing. Our material suppliers TACONIC have fast delivery time and quick response service prototype and production requirements, increase your speed to market and competitiveness. There are machining RF and microwave good experience, we can process all kinds of PTFE and other materials
Sufficient stock:
We have sufficient rogers material raw as follow:
TLY-5A TLY-5 TLY-3 HT1.5 TLX-0 TLX-9 TLX-8 TLX-7 TLX-6 TLC-27 TLE-95 TLC-30 TPG-30 TLG-30 RF-30 TSM-30 TLC-32 TPG32 TLG-32 TLG-34 TPG35 TLG-35 RF-35 RF-35A RF-35P RF-41 RF-43 RF-45 RF-60A CER-10
So we can do pcb circuit board with your detail requirements in the case of you send us gerber files or any other files
Product Details:
Payment & Shipping Terms:
|
| Base Material: | Rogers 4350B Pcb | Number Of Layers: | 4-Layer |
|---|---|---|---|
| Copper Thickness: | 1oz | Board Thickness: | Mechanical Drill: 8mil(0.2mm) |
| Surface Finishing: | HASL/HASL Lead Free/immersion Gold/ENIG | Min. Line Width: | 0.075mm(3mil) |
| Min. Line Spacing: | 0.1mm(4mil) | Min. Hole Size: | 0.1mm(4mil) |
| High Light: | Pcb Board Prototype,Pcb Design And Fabrication |
||
Some Typical Applications:
• Automotive radar applications
• Global positioning satellite
antennas
• Cellular telecommunications
systems - power amplifi ers and
antennas
• Patch antenna for wireless
communications
• Direct broadcast satellites
• Datalink on cable systems
• Remote meter readers
Rogers 4350B laminate in stock
The increasing complexity of electronic components and switches continually requires faster signal flow rates, and thus higher transmission frequencies. Because of short pulse rise times in electronic components, it has also become necessary for high frequency (HF) technology to view conductor widths as an electronic component.
Depending on various parameters, HF signals are reflected on circuit board, meaning that theimpedance (dynamic resistance) varies with respect to the sending component. To prevent such capacitive effects, all parameters must be exactly specified, and implemented with the highest level of process control.
Critical for the impedances in high frequency circuit boards are principally the conductor trace geometry, the layer buildup, and the dielectric constant (er) of the materials used.
| Capability | Standard | Advanced |
| Laminate materials | FR4 / FR1 / CEM-3 / CEM-1 / Aluminum / Flex-rigid /Teflon / High-TG / Rogers / Taconic | |
| Surface Finish |
HASL (vertical & Horizontal), Lead Free HASL, HASL+Gold Finger, OSP/Entek, ENIG, ENEPIG, Immersion Tin(ISn) ,Immersion Silver(IAg), Carbon Ink, Hard Gold(Flash Gold), Soft Gold |
|
| Min. Thickness for inner layers | 0.020"-0.125" | 0.003”(0.07mm) |
| Board layers | 1-12 Layers | 1-24 Layers |
| Board Thickness | 0.5mm-3mm | 0.2mm-7mm |
| Copper weight | 0.5 oz – 3 oz | 0.5 oz – 8 oz |
| Minimum Trace Width / Spacing | 0.004"/0.004" | 0.003"/0.003" |
| Solder Mask Color |
Green,Blue,Black,Red,Yellow,White, and customized
|
|
| Drill deviation | 0.008" | ±0.002” (0.05mm) |
| PTH hole tolerance | 0.008" | ±0.002” (0.005mm) |
| PTH hole tolerance | 0.008" | ±0.002” (0.005mm) |
| Min hole size | 0.010" | 0.008” (0.02mm) |
| E-test | Flying Probe Tester/Test-Jig/X-ray/ICT/AOI/FCT | |
| Controlled Tolerance | ± 5% | ± 3% |
| Silkscreen Color | White, Black, Yellow, Green, Red, Blue and customized | |
| Min solder mask clearance size | 0.008 | 0.003” (0.07mm) |
| Min silkscreen clearance size | 0.010" | 0.006” (0.15mm) |
| IPC Class | Class 2 | Class 3 |
| Blind Vias | YES | YES |
| Buried Vias | YES | YES |
| Aspect Ratio | 8/1 | 15/1 |
| Carbon Ink | YES | YES |
| Peelable Mask | YES | YES |
| Solder Sample | YES | YES |
| First Article | YES | YES |
| Certificate | UL / SGS / ROH / ISO / TS16949 / ISO14001:2004 | |
| Acceptable file format | GERBER file, PROTEL 99/PADS / POWER PCB / AutoCAD /EGLE |
|
Additional favourable properties are high glass transition temperature, an excellent thermal durability, and very low hydrophilic rate.For many applications, it is sufficient to use Rogers material with an appropriate layer buildup. In addition, we process high-frequency materials with improved dielectric properties. These have a very low loss factor, a low dielectric constant, and are primarily temperature and frequency independent.
We use (among others) Rogers or PTFE materials (for example, Teflon from DuPont) for impedance controlled high frequency circuit boards. Sandwich buildups for material combinations are also possible.
Which widely be used for :
Automotive Antennas / RFID
Back-up Aids
Collision Avoidance
Low-Noise Block Downconverter (LNB)
Mobile Infrastructure Antennas
Point to Point Digital Radios
Power Amplifiers
High Reliability
Airborne Antenna Systems
Broadcast Satellites
Ground Based Radar Systems
Millimeter Wave Applications
Missile Guidance Systems
High Speed Digital
Advantage
1. PCB factory directly
2. PCB Have the comprehensive quality control system
3. PCB good price
4. PCB quick turn delivery time from 48hours
5. PCB certification(ISO/UL E354810/RoHS)
6. 12 years experience in exporting service
7. PCB is no MOQ/MOV.
8. PCB is high quality.Strict through theAOI(Automated Optical Inspection),QA/QC,fly porbe ,Etesting
