Introduction:
Double-sided pcb have one layer dielectric layer in the middle, both sides are traces layer. Multilayer PCB is a multilayer traces layer, a dielectric layer between each 2 layer, a dielectric layer may be made very thin layers . Multilayer circuit board having at least three conductive layers, wherein the outer surface 2layers, while the remaining one was synthesized in the insulating plate. Electrical connection between them is usually done by plated through holes in the circuit board on the implementation of the cross section
Types:
2-28 layer is available in our factory,
Multilayer pcb use in professional electronic equipment (computers, military equipment), especially in the case of the weight and volume overload. In high-speed circuits, the multi-substrate is also very useful, they can provide more than two layer boards for the printed circuit board designers to laying cable, and provides a large area of ground and power.
Product Details:
Payment & Shipping Terms:
|
Brand: | XCE | Model: | XCEM |
---|---|---|---|
Color: | Green | Origin: | Shenzhen |
Size: | 15*15cm | Panel: | 4*3 |
High Light: | multi layered pcb,multilayer pcb manufacturing |
Rigid 18 Layer Multilayer PCB Circuit Boards With ENIG Surface Finish
Specification:
Technology |
Materials |
|
|
PCB thickness |
Final copper |
|
|
Conductor track widths |
Minimum drilling diameter |
|
|
Contour production |
Solder masks |
|
|
Surfaces |
Additional printing |
|
|
Layer |
12-26 |
Material type |
FR-4, CEM-1, CEM-3, High TG, FR4 Halogen Free, Rogers |
Board thickness |
0.21mm to 7.0mm |
Copper thickness |
0.5 OZ to 6 oz |
Size |
Max. Board Size: 580mm×1100mm |
Min. Drilled Hole Size: 0.2 mm (8 mil) |
|
Min. Line Width: 4mil (0.1mm) |
|
Min. Line Spacing: 4mil (0.1mm) |
|
Surface finishing |
HASL / HASL lead free, HAL, Chemical tin, Immersion Silver/Gold, OSP, Gold plating |
Solder Mask Color |
Green/Yellow/Black/White/Red/Blue |
Tolerance |
Shape tolerance: ±0.13 |
Hole tolerance: PTH: ±0.076 NPTH: ±0.05 |
|
Certificate |
UL, ISO 9001, ISO 14001 |
Special requirements |
Buried and blind vias+controlled impedance +BGA |
Profiling |
Punching, Routing, V-CUT, Beveling |
Description:
Multilayer PCBs in form of multiple circuit layers stacked together.
Few already consider 2-layer circut boaders as multilayer, but generally speaking boards with at least 4 or more layers are considered as multilayer. 2-layer circuit boards are sometimes referred to as bi-layer. The upper limit for the amount of layers is wide open.
However, 4- and 6-layers dominate the multilayer area by taking about 90% of the market. Multilayer with up to 24 layers can be produced in our factory.