 |
|
|
|
|
Introduction:
Double-sided pcb have one layer dielectric layer in the middle, both sides are traces layer. Multilayer PCB is a multilayer traces layer, a dielectric layer between each 2 layer, a dielectric layer may be made very thin layers . Multilayer circuit board having at least three conductive layers, wherein the outer surface 2layers, while the remaining one was synthesized in the insulating plate. Electrical connection between them is usually done by plated through holes in the circuit board on the implementation of the cross section
Types:
2-28 layer is available in our factory,
Multilayer pcb use in professional electronic equipment (computers, military equipment), especially in the case of the weight and volume overload. In high-speed circuits, the multi-substrate is also very useful, they can provide more than two layer boards for the printed circuit board designers to laying cable, and provides a large area of ground and power.
Product Details:
Payment & Shipping Terms:
|
| Board Size: | 1*1.5cm | Board THK: | 0.6mm |
|---|---|---|---|
| Cu THK: | 35UM | Material: | FR4 KB |
| Application: | Elevator | Layer: | 4 |
| High Light: | multilayer pcb fabrication,multilayer pcb manufacturing |
||
Multilayer Customized PCB Integrated Circuit Board For Elevator
Specification:
| Base Material: Fr4 KB Material |
| Layer:4 |
| Thickness: 0.6MM |
| Copper weight:1OZ |
| Surface finish: HASL LF |
Description:
1. at most 99 floor display, with dynamic show to run direction
2. various input ways, 7 segments, BCD code, Gary code, Binary code, ASCII code
3. display any English letter, like B, overload, inspection, etc.
4. doc matrix display, color can be red, yellow, green and blue
Technical requirement:
1) Professional Surface-mounting and Through-hole soldering Technology
2) Various sizes like 1206,0805,0603 components SMT technology
3) ICT(In Circuit Test),FCT(Functional Circuit Test) technology.
4) PCB Assembly With UL,CE,FCC,Rohs Approval
5) Nitrogen gas reflow soldering technology for SMT.
6) High Standard SMT&Solder Assembly Line
7) High density interconnected board placement technology capacity.
Quote requirement:
· Gerber file of the bare PCB board
· BOM (Bill of material) for assembly
· To short the lead time, please kindly advise us if there is any acceptable components substitution.
· Testing Guide & Test Fixtures if necessary
· Programming files & Programming tool if necessary
· Schematic if necessary
Parameter:
| Layer No. | 1-16 | ||||||||
| Min board thickness | 2 layer 0.2mm | ||||||||
| 4 layer 0.4mm | |||||||||
| 6 layer 0.6mm | |||||||||
| 8 layer 0.8mm | |||||||||
| 10 layer 1.0mm | |||||||||
| Max panel size | 508*610mm | ||||||||
| Board thickness tolerance | T≥0.8mm±8%,T＜0.8mm±5% | ||||||||
| Wall hole copper thickness | ＞0.025mm(1mil) | ||||||||
| Finished hole | 0.2mm-6.3mm | ||||||||
| Min line width | 4mil/4mil(0.1/0.1mm) | ||||||||
| Min bonding pad space | 0.1mm(4mil) | ||||||||
| PTH aperture tolerance | ±0.075mm(3mil) | ||||||||
| NPTH aperture tolerance | ±0.05mm(2mil) | ||||||||
| Hole site deviation | ±0.05mm(2mil) | ||||||||
| Profile tolerance | ±0.10mm(4mil) | ||||||||
| Board bend&warp | ≤0.7% | ||||||||
| Insulation resistance | ＞1012Ωnormal | ||||||||
| Through-hole resistance | ＜300Ωnormal | ||||||||
| Electric strength | ＞1.3kv/mm | ||||||||
| Current breakdown | 10A | ||||||||
| Peel strength | 1.4N/mm | ||||||||
| Soldmask regidity | ＞6H | ||||||||
| Thermal stress | 288℃20Sec | ||||||||
| Testing voltage | 50-300v | ||||||||
| Min buried blind via | 0.2mm(8mil) | ||||||||
| Outer cooper thickness | 1oz-5oz | ||||||||
| Inner cooper thickness | 1/2 oz-4oz | ||||||||
| Aspect ratio | 8:1 | ||||||||
| SMT min green oil width | 0.08mm | ||||||||
| Min green oil open window | 0.05mm | ||||||||
| Insulation layer thickness | 0.075mm-5mm | ||||||||
| Aperture | 0.2mm-0.6mm | ||||||||
