 |
|
|
|
|
Introduction:
High frequency pcb widely used in Mobile communication products,
amplifier, low noise amplifier,GSM, CDMA, 3G smart antenna,splitters, diplexers, filters, couplers and other passive components, Performance:low loss,high dielectric constant and stable,can provide a small size sheet
Material:
PTFE + woven glass
Dielectric constant (DK): 2.55,2.65,2.75,2.85,2.95,3.00,3.30,3.50
Loss tangent (DF): 0.0030@10GHz
Copper adhesion: 12ibs / inch
Water absorption: ≤0.02%
Surface resistance: 1X1016 Ω
Volume resistivity: lXl012Ω
Thermal conductivity: 0.8 kcal / m / h ℃
Working temperature: -50 ~ + 260 ℃
Product Details:
Payment & Shipping Terms:
|
| Surface Finish: | Immersion Gold | Board THK: | 0.2mm |
|---|---|---|---|
| Product Name: | High Frequency Pcb | Size: | 15*6 |
| High Light: | printed circuit board design,printed circuit board pcb |
||
Microwave Amplifiers High Frequency PCB Boards With High Power Low Noise Band
Specification:
Wideband 18 to 40 GHz Amplifier High Frequency PCB
Board size: 15*6 cm
Material: Rogers
Board thickness: 0.2mm
Copper foil: 1OZ
Layer: 2
Model: XCEH
Parameter:
| Min board thickness | 2 layer 0.2mm | ||||||||
| 4 layer 0.4mm | |||||||||
| 6 layer 0.6mm | |||||||||
| 8 layer 0.8mm | |||||||||
| 10 layer 1.0mm | |||||||||
| Max panel size | 508*610mm | ||||||||
| Board thickness tolerance T≥0.8mm±8%,T＜0.8mm±5% | |||||||||
| Wall hole copper thickness | ＞0.025mm(1mil) | ||||||||
| Finished hole | 0.2mm-6.3mm | ||||||||
| Min line width | 4mil/4mil(0.1/0.1mm) | ||||||||
| Min bonding pad space | 0.1mm(4mil) | ||||||||
| PTH aperture tolerance | ±0.075mm(3mil) | ||||||||
Description:
High frequency PCBs with aluminum heat sink for telecommunication and aerospace industries using customer specific electrically and thermally conductive bonding films. Microwave PCB’s: XCE has enormous experience and technical expertise in the manufacturing of time critical, high technology RF circuits. The company works closely with its worldwide customers to deliver prototype-to-large volume manufacturing of circuits. During this process our engineering staff discusses with the customers’ staff to come up with the optimized designs for high quality, low cost and speedy delivery.
| NPTH aperture tolerance | ±0.05mm(2mil) | ||||||||
| Hole site deviation | ±0.05mm(2mil) | ||||||||
| Profile tolerance | ±0.10mm(4mil) | ||||||||
| Board bend&warp | ≤0.7% | ||||||||
| Insulation resistance | ＞1012Ωnormal | ||||||||
| Through-hole resistance | ＜300Ωnormal | ||||||||
