We have RF and microwave processing experience, we fully understand your PCB's request. Our engineers studied a variety of RF composite materials, know each performance and processing characteristics, which is the basic foundation of good RF microwave processing. Our material suppliers TACONIC have fast delivery time and quick response service prototype and production requirements, increase your speed to market and competitiveness. There are machining RF and microwave good experience, we can process all kinds of PTFE and other materials
We have sufficient rogers material raw as follow:
TLY-5A TLY-5 TLY-3 HT1.5 TLX-0 TLX-9 TLX-8 TLX-7 TLX-6 TLC-27 TLE-95 TLC-30 TPG-30 TLG-30 RF-30 TSM-30 TLC-32 TPG32 TLG-32 TLG-34 TPG35 TLG-35 RF-35 RF-35A RF-35P RF-41 RF-43 RF-45 RF-60A CER-10
So we can do pcb circuit board with your detail requirements in the case of you send us gerber files or any other files
Payment & Shipping Terms:
|Color:||/||Min Line Space:||5mil|
|Min Line Width:||5mil||Copper Thickness:||1OZ|
|Surface:||Electrolytic Soft Gold|
Pcb Board Prototype,
Printing Circuit Boards
Hybrid Rogers+FR4 Solutions 6 Layer High Frequency Board High-speed Applications In Electrolytic soft Gold
min Hole size:0.2mm
min line width and distance:5/5mil
Surface treatment: Electrolytic soft Gold
L1-L2 Blind holes;
L2-L3 Bury holes;
L1-L4 Through holes;
Copper based with Rogers 4350 T1.3mm.
Copper thickness 0.70mm;
Milling thickness 1.2mm.
RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics with electrical performance close to PTFE/woven glass and the manufacturability of epoxy/ glass.
Providing tight control on dielectric constant and low loss while utilizing the same processing method as standard epoxy/glass, RO4350B is available at a fraction of the cost of conventional microwave laminates. No special through-hole treatments or handling procedures are required as with PTFE based microwave materials.
RO4350B materials are UL 94V-0 rated for active devices and high power RF designs.
|PCB Type:||Rogers PCB|
|Layer :||6 layer|
|Min .Line Width/Space:||5mil/5mil|
|Min. Via Diameter:||0.3mm|
|Surface Finish:||Electrolytic soft Gold|
Rogers pcb multilayer pcb with high frequency can improvide the products quality ,
with high techolonogy treatment improve the life cycle of the products .
The high frequency rogers pcb with 4 mil 1 oz ,
also with DHI half hole blind buried techonology .
Immersion gold surface finish make the pcb 's conductive performance enhancements.
Multilayer pcb design ,the precision of the pcb improves much more better .
Low dielectric : 3 dielectric conductivity much more precision .
Rogers material used in RF Microwave fields in radar system .
Space Saving Circuitry
Satellite Communications Systems
Aircraft Collision Avoidance Systems
Ground Radar Warning Systems
Datalink on cable systems
Remote meter readers
LMDS and wireless broadband
Base station infrastructure
Rogers material in stock:
Our PCB board manufacture
* PCB board file with parts list provided by customers
* PCB board made, circuit board parts purchased by us
* Electronic testing circuit board
* Fast delivery, anti-static package
* RoHS Directive-compliant, lead-free
Testing Procedures For PCB Board
---We perform multiple quality assuring procedures before shipping out any PCB board. These include:
* Visual Inspection
* Flying probe
* Bed of nails
· * Impedance control
· * Solder-ability detection
* Digital metallograghic microscope
· *AOI (Automated Optical Inspection)
RO4350B RO4003C TLX-8 (TACONIC) F4B Woven Glass-Reinforced PTFE
4mil(0.1mm) 8mil (0.203mm) 20mil(0.5mm)
10mil(0.254mm) 12mil(0.3mm) 30mil(0.762mm)
13.3mil(0.338mm) 20mil(0.508mm) 40mil(1.0mm)
20mil (0.508mm) 32mil(0.813mm)
Amplifier Combiner Coupler Mixer Multiplexer Power divider WiFi
WiMAX, LTE bands 3G and 4G antenna