Introduction:
RF PCB introduction:
RF is Radio Frequency, referring to the radio, a high-frequency signal.
For performance index of PCB, it can be an ordinary FR4 epoxy glass fiber and also Teflon and other dedicated microwave substrates.
RF board standards:
1,In the design of miniwatt RF PCB, main material is standard FR4 (Good insulation characteristics
uniform material, dielectric constant ε = 4,10%).
2,In the RF PCB, every component should compact configuration to ensure that the shortest connection
between the every component.
3, For a mixed-signal PCB, RF and analog section should stay away from digital part
(This distance is usually more than 2cm, at least 1cm), the digital part of the ground should be
separated from the RF part.
4, To choose the components working in high frequency environment should use of surface-mount component as far as possible. Because the surface-mount component is small volume generally and the pin of component is very short.
Product Details:
Payment & Shipping Terms:
|
Material: | Taconic | Layer: | 2 |
---|---|---|---|
Color: | Gray | Min Line Space: | 5mil |
Min Line Width: | 5mil | Copper Thickness: | 1OZ |
Board Size: | 200*100mm | Panel: | 1 |
Surface: | ENIG | ||
High Light: | pcb printed circuit board,Making Printed Circuit Boards |
Taconic High Frequency PCB 1.6MM Thickness Immersion Silver Finished Surface Radar Antenna Array
Quick detail:
Origin:China | Special: Taconic material |
Layer:2 | Thickness:1.6mm |
Surface: Immersion Silver | Hole:0.8 |
TACONIC company is the world's largest production of PTFE CCL manufacturer, with a glass woven cloth coated with PTFE patent, is the PTFE microwave CCL industry, one of the technology leader, and its microwave CCL's dielectric constant To 2.17-10.0, occupying the global antenna sheet market share of more than 80%.
TACONIC high-performance insulation materials for the microwave, radio frequency (RF) and high-speed digital signal processing market PTFE / woven glass fiber woven sheet. This material can be used in LNAs, LNBs, PCS / PCN antenna systems, Global Positioning System (GPS) and UMTS antenna systems, as well as power amplifiers, passive components, collision avoidance radar systems, aeronautical telemetry and phase control Array radar system.
Introduction:
We have RF and microwave processing experience,
we fully understand your PCB's request.
Our engineers studied a variety of RF composite materials,
know each performance and processing characteristics,
which is the basic foundation of good RF microwave processing.
Our material suppliers TACONIC have fast delivery time and quick response service prototype
and production requirements,
increase your speed to market and competitiveness.
There are machining RF and microwave good experience, we can process all kinds of PTFE
and other materials
Sufficient stock:
We have sufficient rogers material raw as follow:
TLY-5A TLY-5 TLY-3 HT1.5
TLX-0 TLX-9 TLX-8 TLX-7 TLX-6 TLC-27
TLE-95 TLC-30 TPG-30 TLG-30 RF-30 TSM-30
TLC-32 TPG32 TLG-32 TLG-34 TPG35 TLG-35 RF-35 RF-35A
RF-35P RF-41 RF-43 RF-45 RF-60A CER-10
TACONIC company is the world's largest production of PTFE CCL manufacturer,
with a glass woven cloth coated with PTFE patent, is the PTFE microwave CCL industry,
one of the technology leader, and its microwave CCL's dielectric constant To 2.17-10.0,
occupying the global antenna sheet market share of more than 80%.
TACONIC high-performance insulation materials for the microwave,
radio frequency (RF) and high-speed digital signal processing market PTFE / woven glass fiber woven
sheet.
This material can be used in LNAs, LNBs, PCS / PCN antenna systems,
Global Positioning System (GPS) and UMTS antenna systems, as well as power amplifiers,
passive components, collision avoidance radar systems, aeronautical telemetry
and phase control Array radar system.
Typical Applications