RF PCB introduction:
RF is Radio Frequency, referring to the radio, a high-frequency signal.
For performance index of PCB, it can be an ordinary FR4 epoxy glass fiber and also Teflon and other dedicated microwave substrates.
RF board standards:
1,In the design of miniwatt RF PCB, main material is standard FR4 (Good insulation characteristics
uniform material, dielectric constant ε = 4,10%).
2,In the RF PCB, every component should compact configuration to ensure that the shortest connection
between the every component.
3, For a mixed-signal PCB, RF and analog section should stay away from digital part
(This distance is usually more than 2cm, at least 1cm), the digital part of the ground should be
separated from the RF part.
4, To choose the components working in high frequency environment should use of surface-mount component as far as possible. Because the surface-mount component is small volume generally and the pin of component is very short.
Payment & Shipping Terms:
pcb printed circuit board,
quick turn PCB
HF Taconic PCB RF & Microwave Laminates Printed Circuit Board
|Copper foil: 0.035mm|
|Surface finish: Gold plating|
|Copper thickness: 1OZ|
|Working temperature: -100-+150℃|
1. Unit size: 90 x 150 mm
2. No. Of layers: 4
3. Laminate: 1.6 mm Taconic
4. Plating: Gold
5. Solder/Component mask: None
6. Component mark: None
7. Min track width/line spacing: 0.25 mm
8. Min. Hole size: 0.8 mm
9. No. Of holes per unit: 12
10. Profiling: Routing
Specialized in high frequency PCB, double-sided multi-layer PCB manufacturer,
maximum processing layers 28 layers, the company has a full range of domestic and imported
high frequency material(Rogers ROGERS, TACONIC series, high frequency microwave PTFE circuit
boards, Teflon Teflon, PTFE circuit boards, dielectric constant ranging from 2.2 10.6), to provide quality
and efficient products for you
Communications, power, instrumentation, computer networks,
digital products, industrial control, scientific, educational,
medical, aerospace and defense, and other high-tech fields.