 |
|
|
|
|
Introduction:
Double-sided pcb have one layer dielectric layer in the middle, both sides are traces layer. Multilayer PCB is a multilayer traces layer, a dielectric layer between each 2 layer, a dielectric layer may be made very thin layers . Multilayer circuit board having at least three conductive layers, wherein the outer surface 2layers, while the remaining one was synthesized in the insulating plate. Electrical connection between them is usually done by plated through holes in the circuit board on the implementation of the cross section
Types:
2-28 layer is available in our factory,
Multilayer pcb use in professional electronic equipment (computers, military equipment), especially in the case of the weight and volume overload. In high-speed circuits, the multi-substrate is also very useful, they can provide more than two layer boards for the printed circuit board designers to laying cable, and provides a large area of ground and power.
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Fr4 Multilayer Pcb | Layer Of Number: | 4 Layer |
|---|---|---|---|
| Surface Finish: | HASL Lead Free | Base Material: | Fr4 |
| Solder Mask: | Blue | Board THK: | 1.2MM |
| High Light: | multi layered pcb,multilayer pcb fabrication |
||
FR4 PCB Multilayer Layer Mixed Compression with Rogers4350B High Frequency Circuit Board
Specification:
| Model: XCEF-3 |
| Color: Blue solder mask white silk screen |
| Layer:4 layer |
| Origin:Shenzhen |
| Board Thickness:0.080inch Copper Thickness:3OZ |
| Surface Finish:Immersion gold with 1mil THK |
Description:
|
Specifications |
Details |
|
Material Type |
FR-4 |
|
Thickness ( in inches) |
0.080” |
|
Layer count |
1 to 28 Layers |
|
Max. Board Size |
23.00” x 35.00”(580mm*900mm) |
|
IPC Class |
Class II, Class III , Class 1 |
|
Annular Ring |
5 mil/side or Greater (Min. Design) |
|
Finish Plating |
Immersion Gold |
|
Copper Weight |
0.5OZ-7OZ |
|
Trace/Space Width |
3 Mils or Greater |
|
Drill Clearance |
0.1mm(laser drilling) |
|
Plated Slots |
0.036 or Greater |
|
Smallest Hole |
0.1mm or Greater |
| Board Size
|
20*10cm |
|
SMD Pitch |
0.080” - 0.020” - 0.010” |
|
Soldermask Type |
LPI Glossy, LPI-Matte, SR1000 |
|
Soldermask Color |
Green, Red, Blue, Black, White, Yellow, |
|
Legend Color |
White, Yellow, Black, Red, Blue |
|
CNC Route Point |
Any |
|
Minimum Route Width |
0.031” |
|
Scoring |
Straight Lines, Jump Scoring, Panel Edge to Edge, CNC* |
|
Body Gold |
HARD*, IMMERSION* (up to 50 MICRON GOLD) |
|
Data File Format |
Gerber 274x with embedder aperture |
|
Fab. Drawing Format |
DXF, HPGL, DWG, PDF, Gerber |
|
E.T Testing |
Flying Probe, Single Sided, 1up Plate, Clampshell, Net List |
|
Counter Sink / Counter Bore |
Availiable up to 0.250 Diameter |
|
Control Impedence |
Yes |
|
Blind Vias / Buried Vias |
Yes |
|
Peelable Mask |
Yes |
|
Carbon |
Yes |
Advantage:
sufficient stocks of hi-frequency pcb materials such as Rogers,TACONIC,Arlon,Isola,F4B,TP-2,FR-4 (dielectric rage:2.2-16) mainly used in the area of high technologies.
special and high precision printed circuit boards with the strong production capability of 2 to 28 layers of highly precise impedence,multi-layer blind buried,multi-layer mix-compression,highTG, copper substrate,Ceramic substrate PCB.
Others:
I. Who we are?
XCE was established in 2002, an over 13 year PCB manufacturer in Shenzhen
We have 6 Years high frequency pcb production experience
We are certified by ISO13485, TS16949, ULE332411, ISO14001, ISO9001
70% of our customers are from Europe and North America
We use very good material, such as KB, Shengyi, etc
100% of our prodcuts are tested and 100% pass before delivery
Fast samples for your test
