 |
|
|
|
|
Introduction:
What is flexible PCB? Flexible PCB is flexible printed circuit board using for connecting different hard designs, we also called flexible circuits,Flex PCB or FPCB, Flexible PCB is fabricated by soft material like polymide ,the best flexible pcb material is dupont that have low dielectric breakdown.
Flex PCB is thin,light weight electrical circuits board that conform to small space and different shapes , Flexible PCB board consist by base material polimide, Protective film,Adhesive,stiffener,shield,PSA glue,copper,solder mask, silk screen.
Advantage of Flexible PCB:
1.Reduces PCB size and weight – save up 70% lighter than rigid pcb
2.Improves electronic packaging – gives designers the ability to solve packaging and interconnect issues based on the ability to form, bend and move
3.Interconnect solution – reduces the number of interconnects (wire, cables, connectors, PCBs)
4.Electrical integration – tailored solutions can be created based on the myriad of material choices, plating and designs
5.Heat dissipation/power
6.Mechanical and electrical repeatability
7.PCB Assembly Cost savings – Reduce 30% hand wiring
8.Space savings – up to 60%
9.Wiring errors eliminated
Product Details:
Payment & Shipping Terms:
|
| Base Material: | Rogers5880 | Name: | Rogers PCB |
|---|---|---|---|
| Board Thickness: | 0.2mm | Copper THK: | 1OZ |
| Board Size: | 9*9cm | Surface Finish: | Immersion Gold |
| High Light: | printed circuit board pcb,high speed pcb layout |
||
Fr4 High TG 170 Rigid PCB Board Prototype With 2U Gold Plating Surface Finish
Specification
|
PCB Type: |
Rogers PCB |
|
Layer : |
6 layer |
|
Min .Line Width/Space: |
3mil/3mil |
|
Min. Via Diameter: |
0.3mm |
|
Finish Thickness: |
0.2mm |
|
Surface Finish: |
ENIG |
|
Size: |
90*90MM |
|
Material: |
5880 |
|
Color: |
golden |
|
Application: |
aerospace |
Parameter
| Profile tolerance | ±0.10mm(4mil) | ||||||||
| Board bend&warp | ≤0.7% | ||||||||
| Insulation resistance | ＞1012Ωnormal | ||||||||
| Through-hole resistance | ＜300Ωnormal | ||||||||
| Electric strength | ＞1.3kv/mm | ||||||||
| Current breakdown | 10A | ||||||||
| Peel strength | 1.4N/mm | ||||||||
| Soldmask regidity | ＞6H | ||||||||
| Thermal stress | 288℃20Sec | ||||||||
| Testing voltage | 50-300v | ||||||||
| Min buried blind via | 0.2mm(8mil) | ||||||||
| Outer cooper thickness | 1oz-5oz | ||||||||
| Inner cooper thickness | 1/2 oz-4oz | ||||||||
| Aspect ratio | 8:1 | ||||||||
| SMT min green oil width | 0.08mm | ||||||||
| Min green oil open window | 0.05mm | ||||||||
| Insulation layer thickness | 0.075mm-5mm | ||||||||
| Aperture | 0.2mm-0.6mm | ||||||||
| Special technology | Inpedance,blind buried via,thick gold,aluminumPCB | ||||||||
| Surface finish | HASL,lead free,Immersion gold,immersion tin,immersion silver,ENIG,Blue glue,gold plating | ||||||||
Description:
A dielectric material is a substance that is a poor conductor of electricity, and used as an insulating layer in the PCB build up. Porcelain, mica, glass, plastics and some metal oxides are good dielectrics. The lower the dielectric loss, (the proportion of energy lost as heat) the more effective the dielectric material. If the voltage across a dielectric material becomes too great -- that is, if the electrostatic field becomes too intense -- the material will suddenly begin to conduct current. This phenomenon is called dielectric breakdown.
Our high density circuit boards have the technology pushing capabilities to drive applications in a large number of industries including but not limited to semiconductor test equipment, defense, medical and aerospace.
