Introduction:
High frequency board usually use FR4 glass fiber lamination, but also the whole of the epoxy glass cloth repression, more uniform color the entire pcb board, bright. Density larger than the low frequency pcb board
High-frequency electronic devices is the development trend, especially in the growing wireless networks, satellite communications, and information products to high speed and high-frequency, and voice communications products to large capacity and fast transmission of wireless, video, and data normalization.
Therefore, the development of next-generation products require high frequency board, satellite systems, mobile phone base stations and other communications products received must be applied to high-frequency circuit boards, and the inevitable rapid development in the coming years, will be a large demand for high-frequency board.
Material:
(1) The dielectric constant (Dk) must be small and very stable, usually the smaller the better signal transfer rate
(2) The dielectric loss (Df) must be small, which mainly affects the quality of signal transmission, the smaller dielectric loss the smaller signal loss
(3) Consistent with the thermal expansion coefficient of copper
(4) Low water absorption, high water absorption will affect the dielectric constant and dielectric loss at the time of moisture.
(5) Other heat resistance, chemical resistance, impact strength, peel strength, etc. must also be good.
FAQ:
Q:How to get a PCB prototype quotation?
A:1.PCB Gerber file
2.PCB technics requirements(board thickness, copper thickness, solder mask color, surface treatment)
Q:Is your tooling cost one-off payment?
A:YES
Product Details:
Payment & Shipping Terms:
|
Product Name: | RF PCB | Layer Of Number: | 4 |
---|---|---|---|
Surface Finish: | ENIG | Base Material: | Rogers |
Cu THK: | 1OZ | Board THK: | 1.6mm |
High Light: | Quick Turn Pcb Fabrication,lead free pcb |
FM AM Radio RF PCB For Mobile 3G / 4G Base Station With High Frequency Rogers Material
Quick detail:
Layer of number |
4 |
Surface finish |
enig |
Base material |
Rogers |
Cu THK |
1OZ |
Board THK |
1.6mm |
File format |
Gerber/CAD |
Board size |
8*5cm |
Solder mask |
Green/blue/black/red |
Advantage:
1 laser drill hole machine
2 Using best bonding material raw
3 main in high frequency pcb
4 FR4+ROGERS mixed compression is available.
Description:
Shenzhen Xinchenger Electronics is a leading manufacturer of high frequency pcb circuit more than 6
years in shenzhen.
We concentrate on high difficult,high precision pcb circuit board production.3mil line space and width is
available here
If you have any needs,please do not hesitate to send us inquiry.
Application:
Industrial automation controls,Wireless and wired telecommunication
Medical instrumentation,Transportation and so on.
Specification:
Annual stock meterial |
Rogers,Taconic,Arton,Isola,F4B,TP-2,FR4,High TG,Halogen free |
||
Layer No. |
1-16 |
||
Min board thickness |
2 layer 0.2mm |
||
4 layer 0.4mm |
|||
6 layer 0.6mm |
|||
8 layer 0.8mm |
|||
10 layer 1.0mm |
|||
Max panel size |
508*610mm |
||
Board thickness tolerance |
T≥0.8mm±8%,T<0.8mm±5% |
||
Wall hole copper thickness |
>0.025mm(1mil) |
||
Finished hole |
0.2mm-6.3mm |
||
Min line width |
4mil/4mil(0.1/0.1mm) |
||
Min bonding pad space |
0.1mm(4mil) |
||
PTH aperture tolerance |
±0.075mm(3mil) |
||
NPTH aperture tolerance |
±0.05mm(2mil) |
||
Hole site deviation |
±0.05mm(2mil) |
||
Profile tolerance |
±0.10mm(4mil) |
||
Board bend&warp |
≤0.7% |
||
Insulation resistance |
>1012Ωnormal |
||
Through-hole resistance |
<300Ωnormal |
||
Electric strength |
>1.3kv/mm |
||
Current breakdown |
10A |
||
Peel strength |
1.4N/mm |
||
Soldmask regidity |
>6H |
||
Thermal stress |
288℃20Sec |
||
Testing voltage |
50-300v |
||
Min buried blind via |
0.2mm(8mil) |
||
Outer cooper thickness |
1oz-5oz |
||
Inner cooper thickness |
1/2 oz-4oz |
||
Aspect ratio |
8:1 |
||
SMT min green oil width |
0.08mm |
||
Min green oil open window |
0.05mm |
||
Insulation layer thickness |
0.075mm-5mm |
||
Aperture |
0.2mm-0.6mm |
||
Special technology |
Inpedance,blind buried via,thick gold,aluminumPCB |
||
Surface finish |
HASL,lead free,Immersion gold,immersion tin,immersion silver, ENIG,Blue glue,gold plating |