Introduction:
Heavy Copper PCB are printed circuit boards with 3 or more ounces of finished copper in the inner and/or outer layers.
While there is no standard definition of Heavy Copper, it is generally accepted that if 3 ounces (oz) of copper or more is used on the internal and external layers of a printed circuit board, it is called a heavy copper PCB. Any circuit with a copper thickness of more than 4 oz per square foot (ft2) is also categorized as a heavy copper PCB. Extreme copper means 20 oz per ft2 to 200 oz per ft2.
When the electronic device need high power or current through, Then we need consider heave copper to control the thermal on PCB
The benefits of heavy copper in PCBs:
Reduction of thermal strain
Better current conductivity
Can survive repeated thermal cycling
Smaller PCB size due to layering of copper
Increased connector site strength
Product Details:
Payment & Shipping Terms:
|
Color: | Creen | Material: | Rogers |
---|---|---|---|
Layer: | Double Sided | Board Size: | 8*6cm |
Copper Thinckness: | 1 Oz | Surface: | Immerssion Gold |
Min Line Width: | 5 Mil | Min Line Space: | 5 Mil |
Name: | FR4 Pcb | ||
High Light: | double sided pcb board,double side pcb |
Double sided high frequency Rogers 4350B pcb with 0.508 mm thinckness board for wireless transceiver
Quick Detail :
1. Type : Pcb
2. Material : Rogers
3. Layer : Double sided
4. Products Size : 8*6 cm
5. Permittivity : 3.5
6. Surface finish : Immersion Gold
Features:
1. Rogers pcb multilayer pcb with high frequency can improvide the products quality ,with high techolonogy treatment improve the life cycle of the products .
2. Immersion gold surface finish make the pcb 's conductive performance enhancements.
3. Multilayer pcb design ,the precision of the pcb improves much more better .
4. Low dielectric : 3.5 dielectric conductivity much more precision .
Description :
Low dielectric high-frequency multilayer rogers pcb ,improve the rogers 4350B pcb 's conductivity and the high quality make the customer save more costs .
High frequency PCBs with aluminum heat sink for telecommunication and aerospace industries using customer specific electrically and thermally conductive bonding films. Microwave PCB’s: XCE has enormous experience and technical expertise in the manufacturing of time critical, high technology RF circuits. The company works closely with its worldwide customers to deliver prototype-to-large volume manufacturing of circuits. During this process our engineering staff discusses with the customers’ staff to come up with the optimized designs for high quality, low cost and speedy delivery.
Production Description :
XCE PCB technical specifications | ||
Annual stock Material | Rogers,Taconic,Arton,Isola,F4B,TP-2.FR-4,High TG,Halogen free | |
Layer No. | 1~16 | |
Min board thickness |
2 layer0.2mm 4 layer0.4mm 6 layer 0.6mm 8 layer 0.8mm 10 layer 1.0mm |
|
Max panel size | 508*610mm | |
Board thickness tolerance | T≥0.8mm±8%.,T<0.8mm±5% | |
Wall hole copper thickness | >0.025mm(1mil) | |
Finished hole | 0.2mm-6.3mm | |
Min line width | 4mil/4mil(0.1/0.1mm) | |
Min bonding pad space | 0.1mm(4mil) | |
PTH aperture tolerance | ±0.075mm(3mil) | |
NPTH aperture tolerance | ±0.05mm(2mil) | |
Hole site deviation | ±0.05mm(2mil) | |
Profile tolerance | ±0.10mm(4mil) | |
Board bend&warp | ≤0.7% | |
Insulation resistance | >1012Ωnormal | |
Through-hole resistance | <300Ωnormal | |
Electric strength | >1.3kv/mm | |
Current breakdown | 10A | |
Peel strength | 1.4N/mm | |
Soldmask regidity | >6H | |
Thermal stress | 288℃20Sec | |
Testing voltage | 50-300V | |
Min buried blind via | 0.2mm(8mil) | |
Outer copper thickness | 1oz-5oz | |
Inner cooper thickness | 1/2 oz-4oz | |
Aspect ratio | 8:1 | |
SMT min green oil width | 0.08mm | |
Min green oil open window | 0.05mm | |
Insulation layer thickless | 0.075mm-5mm | |
Taphole aperture | 0.2mm-0.6mm | |
Special technology | Indepedance,Blind buried via,thick gold,aluminum PCB | |
Surface finish | HASL,Lead free HASL,Immersion Gold, Immersion Tin, Immersion Silver,OSP ,ENIG ,Golden finger,Blue glue,Gold plating |
Competitive Advantage:
1) With UL,ROHS,ISO,IPC
2).Lead time:3-10 working days
3)Competitive price best quality
4).Rich 20 years experience in High Tg Multilayer PCB .
What Information customer need to provide for quotation ?
1. PCB Gerber files ,protel,powerpcb,Autocad,etc.
2. BOM list for PCB assembly.
3. Send us your sample PCB or PCBA.
4. OEM is acceptable.
Detailed Images :