RF PCB introduction:
RF is Radio Frequency, referring to the radio, a high-frequency signal.
For performance index of PCB, it can be an ordinary FR4 epoxy glass fiber and also Teflon and other dedicated microwave substrates.
RF board standards:
1,In the design of miniwatt RF PCB, main material is standard FR4 (Good insulation characteristics
uniform material, dielectric constant ε = 4,10%).
2,In the RF PCB, every component should compact configuration to ensure that the shortest connection
between the every component.
3, For a mixed-signal PCB, RF and analog section should stay away from digital part
(This distance is usually more than 2cm, at least 1cm), the digital part of the ground should be
separated from the RF part.
4, To choose the components working in high frequency environment should use of surface-mount component as far as possible. Because the surface-mount component is small volume generally and the pin of component is very short.
Payment & Shipping Terms:
|Base Material:||Taconic||Surface Finish:||Gold Plated|
|Layer Of Number:||6||Copper THK:||1.5OZ|
pcb printed circuit board,
Making Printed Circuit Boards
Gold Platted Taconic PCB Blue Solder Mask For Driverless System
|Base material: taconic||260*90 mm||Board thickness||1.2mm|
|Layer||6||Copper thickness||1.5 OZ|
|Min line space||5mil||Min line width||5mil|
Quotation Requirement and Time:
1) Following specifications are needed for quotation:
a) Base material:
b) Board thickness:
c) Copper thickness:
d) Surface treatment:
e) color of solder mask and silkscreen:
Taconic's Industrial Products Division produces PTFE and silicone coated fabrics, tapes and belts for a wide range of industrial applications. These durable coatings offer a host of benefits that make them ideal for demanding environments.
Taconic's Advanced Dielectric Division is a world leader in RF laminates, prepregs and high speed digital and flexible interconnect materials utilized in some of the most cutting-edge communication systems in the world.