We have RF and microwave processing experience, we fully understand your PCB's request. Our engineers studied a variety of RF composite materials, know each performance and processing characteristics, which is the basic foundation of good RF microwave processing. Our material suppliers TACONIC have fast delivery time and quick response service prototype and production requirements, increase your speed to market and competitiveness. There are machining RF and microwave good experience, we can process all kinds of PTFE and other materials
We have sufficient rogers material raw as follow:
TLY-5A TLY-5 TLY-3 HT1.5 TLX-0 TLX-9 TLX-8 TLX-7 TLX-6 TLC-27 TLE-95 TLC-30 TPG-30 TLG-30 RF-30 TSM-30 TLC-32 TPG32 TLG-32 TLG-34 TPG35 TLG-35 RF-35 RF-35A RF-35P RF-41 RF-43 RF-45 RF-60A CER-10
So we can do pcb circuit board with your detail requirements in the case of you send us gerber files or any other files
Payment & Shipping Terms:
|Min Line Space:||5mil||Min Line Width:||5mil|
|Copper Thickness:||1OZ||Board Size:||79*85MM|
Pcb Board Prototype,
Pcb Design And Fabrication
Are you looking for low-cost Rogers PCB manufacturing?
We provide competitively priced Rogers printed circuit board fabrication for thousands of design engineers, PCB assemblers, students, and hobbyists from around the world.
Three differences between us and other low cost PCB manufacturers are:
We provide higher quality Rogers boards
Faster lead times (24 hours for some PCBs)
Superior customer service (Dedicated account rep)
Customize High Frequency Hybrid Rogers PCB,this is Green soldermask finished surface microwave Rogers PCB,we can according to your gerber file custom rogers printed circuit boards,not only have High Frequency Hybrid Rogers PCB,we are also have multi-layer rogers board,with Rogers4350 PCB,Rogers4003 PCB,rogers5880 PCB,Rogers3003 PCB,Rogers3010 PCB,Rogers6010 PCB and so on.
When submitting your Gerber files to us, please be sure to let us know if you need your boards delivered panelized. If so, please let us know what kind of panelization array your contract manufacturer requires. Lastly, let us know if 10% x-out is alright or if your panelized PCBs need to have no x-outs. X-outs are simply bad boards that do not pass electrical testing. If you require no x-outs, the cost per panel will be higher, especially if the Rogers PCB is complex and/or is a large array.
Simple to complex multi-layer Rogers PCBs!
It doesn't matter if you need simple double-sided Rogers printed circuit boards or highly complex multilayered PCBs, we have the capabilities to handle a variety of high-end requireements that other board shops can't.We provide inexpensive printed circuit boards that have blind and buried vias, multi-layers (up to 24 layers), low tolerances, plugged and plated over vias, edge plating, tented vias, and more.
Get complex quick turn Rogers PCBs at a low cost with the highest quality.
See why companies big and small have chosen XCE PCB as their #1 PCB supplier for quick turns and mass Rogers and High frequency pcb production.We look forward to the opportunity to earn your business.
Custom Rogers and high frequency Circuit Boards is headquartered in China.We manufacture all of our quick turn Rogers PCB prototypes in-house in our 5000 square foot state-of-the-art facility.
|Max panel size||32" x 20.5"(800mm x 520mm)|
|Min trace width/ space (inner layer)||4mil/4mil(0.1mm/0.1mm)|
|Min PAD (inner layer)||5 mil(0.13mm)||hole ring width|
|Min thickness(inner layer)||4 mil(0.1mm)||without copper|
|Inner copper thickness||1~4 oz|
|Outer copper thickness||0.5~6 oz|
|Finished board thickness||0.4-3.2 mm|
Board thickness tolerance control
|±0.10 mm||±0.10 mm||1~4 L|
|Inner layer treatment||brown oxidation|
|Layer count Capability||1-30 LAYER|
|alignment between ML||±2mil|
|Min drilling||0.15 mm|
|Min finished hole||0.1 mm|
|Hole precision||±2 mil(±50 um)|
|tolerance for Slot||±3 mil(±75 um)|
|tolerance for PTH||±3 mil(±75um)|
|tolerance for NPTH||±2mil(±50um)|
|Max Aspect Ratio for PTH||8:1|
|Hole wall copper thickness||15-50um|
|Alignment of outer layers||4mil/4mil|
|Min trace width/space for outer layer||4mil/4mil|
|Tolerance of Etching||+/-10%|
|Thickness of solder mask||on trace||0.4-1.2mil(10-30um)|
|at trace corner||≥0.2mil(5um)|
|On base material||≤+1.2mil
|Hardness of solder mask||6H|
|Alignment of solder mask film||±2mil(+/-50um)|
|Min width of solder mask bridge||4mil(100um)|
|Max hole with solder plug||0.5mm|
|Surface finish||HAL (Lead or Lead free), immersion Gold, Immersion Nickel, Electric Gold finger, Electric Gold, OSP, Immersion Silver.|
|Max Nickel thickness for Gold finger||280u"(7um)|
|Max gold thickness for Gold finger||30u"(0.75um)|
|Nickel thickness in Immersion Gold||120u"/240u"(3um/6um)|
|Gold thickness in Immersion Gold||2u"/6u"(0.05um/0.15um)|
|Impedance control and its tolerance||50±10%,75±10%,100±10% 110±10%|
|Trace Anti-stripped strength||≥61B/in(≥107g/mm)|
|bow and twist||0.75%