We have RF and microwave processing experience, we fully understand your PCB's request. Our engineers studied a variety of RF composite materials, know each performance and processing characteristics, which is the basic foundation of good RF microwave processing. Our material suppliers TACONIC have fast delivery time and quick response service prototype and production requirements, increase your speed to market and competitiveness. There are machining RF and microwave good experience, we can process all kinds of PTFE and other materials
We have sufficient rogers material raw as follow:
TLY-5A TLY-5 TLY-3 HT1.5 TLX-0 TLX-9 TLX-8 TLX-7 TLX-6 TLC-27 TLE-95 TLC-30 TPG-30 TLG-30 RF-30 TSM-30 TLC-32 TPG32 TLG-32 TLG-34 TPG35 TLG-35 RF-35 RF-35A RF-35P RF-41 RF-43 RF-45 RF-60A CER-10
So we can do pcb circuit board with your detail requirements in the case of you send us gerber files or any other files
Payment & Shipping Terms:
|Base Material:||Rogers 4003||Product Name:||Electronic Pcb/2K*4K Android Quad Core Motherboard/PCB Prototype/Electronic Circuit Board|
|Number Of Layers:||8-Layer||Copper Thickness:||Inner 1/2 Oz-4oz;Outer 1oz-5oz|
|Board Thickness:||Mechanical Drill: 8mil(0.2mm)||Surface Finishing:||HASL/HASL Lead Free/immersion Gold/ENIG|
|Min. Line Width:||0.075mm(3mil)||Min. Line Spacing:||0.1mm(4mil)|
|Min. Hole Size:||0.1mm(4mil)||Rogers High Frequency PCB:||China Rogers Printed Circuit Board|
|Service:||One Stop Turnkey Service||SMT Efficiency:||BGA.QFP.SOP.QFN.PLCC.CHIP|
|Testing Service:||X-Ray/AOI X-Ray Function Test/Omron AOI/Solder Paste Testing||Application:||Industrial Control/Medical Device Consumer/Communications/Electronics Device/Unicycle/Computer Pcb|
Pcb Design And Fabrication,
Printing Circuit Boards
6 Layer RO4003 Rogers fr4 Mix Laminate High Frequency PCB Circuit Boards
Material: Rogers 4003C 0.203mm+FR4
Special requirements: blind hole
0.1mm BGA hole need to be filled
Rogers 4003C fr4 Stack up files:
Surface finish:Immersion gold,ENIG
6 layer 0.693mm thickness
Green solder mask,white silk screen
Line space and width:6mil
Delivery time:7 working days
Automotive,Backplanes,RF / Microwave,High End Computing
Signal Integrity,Medical,Military,Mobile Devices / Wireless Handsets
Railway,Servers,Switches/Routers,Thermal Management,Wireless Infrastructure
Rogers 4003 PCB Testing Procedures For PCB Board
---We perform multiple quality assuring procedures before shipping out any PCB board. These include:
* Visual Inspection
* Flying probe
* Bed of nails
· * Impedance control
· * Solder-ability detection
* Digital metallograghic microscope
· *AOI (Automated Optical Inspection)
High Frequency Rogers 6-layer PCB
Based on a variety of parameters, HF signals are reflected on circuit board, meaning that the impedance (dynamic resistance) varies with respect towards the sending component. To prevent such capacitive effects, all parameters must be exactly specified, and implemented with the highest amount of approach manage.
Vital for the impedances in high frequency printed circuit boards are principally the conductor trace geometry, the layer buildup, along with the dielectric continuous (er) on the supplies applied.
Materials used for HF circuit boards
For many applications, it is sufficient to use Rogers material with an appropriate layer buildup. In addition, we process high-frequency materials with improved dielectric properties. These have a very low loss factor, a low dielectric constant, and are primarily temperature and frequency independent.
Additional favourable properties are high glass transition temperature, an excellent thermal durability, and very low hydrophilic rate.
We use (among others) Rogers or PTFE materials (for example, Teflon from DuPont) for impedance controlled high frequency circuit boards. Sandwich buildups for material combinations are also possible.
The increasing complexity of electronic components and switches continually requires faster signal flow rates, and thus higher transmission frequencies. Because of short pulse rise times in electronic components, it has also become necessary for high frequency (HF) technology to view conductor widths as an electronic component.
Shipping Method and Payment terms:
1. By DHL, UPS, FedEx, TNT using clients account.
2. We suggest you using our DHL, UPS, FedEx, TNT forwarder.
3. By EMS (Usually for Russia Clients), price is high.
4. By sea for mass quantity according to customer's requirement.
5. By customer's Forwarder
6. By Paypal, T/T, West Union, etc.
Rogers 4003 PCB Parameter
|2||Max working panel area||457 x 610 mm|
|3||Min board thickness||4 layer: 0.40mm|
|6 layer: 0.80mm|
|8 layer: 1.00mm|
|10 layer: 1.20mm|
|4||Min trace width||0.10mm|
|6||Min hole diameter||0.20mm|
|7||Min Copper thickness in hole||0.020mm|
|8||PTH size tolerance||±0.05mm|
|9||NPTH size tolerance||±0.025mm|
|10||Hole position tolerance||±0.05mm|
|12||Min solder mask dam||0.08mm|
|13||Insulation resistance||1E+12Ω (normal condition)|
|14||Max Board thickness/Hole size Rate||'10:01|
|15||Thermal shock endurance||288 3 times in 10sec|
|16||Max Board twist and wrap||≤0.7%|
|17||High Vlotage endurance||1.3KV/mm|
|18||Copper foil peel off endurance||1.4N/mm|
|19||Hardness of resist ink||≥6H|
|Place of Origin:||China|
|Minimum Order Quantity:||1pcs|
|Price:||Please send gerber file for accurate price|
|Packaging Details:||Inner:vacuum packed bubble bag Outer:carton box|
|Delivery Time:||3-8 days|
|Payment Terms:||T/T,western union,paypal,L/C|
|Supply Ability:||1, 000, 000PCS/week|