 |
|
|
|
|
Introduction:
High frequency pcb widely used in Mobile communication products,
amplifier, low noise amplifier,GSM, CDMA, 3G smart antenna,splitters, diplexers, filters, couplers and other passive components, Performance:low loss,high dielectric constant and stable,can provide a small size sheet
Material:
PTFE + woven glass
Dielectric constant (DK): 2.55,2.65,2.75,2.85,2.95,3.00,3.30,3.50
Loss tangent (DF): 0.0030@10GHz
Copper adhesion: 12ibs / inch
Water absorption: ≤0.02%
Surface resistance: 1X1016 Ω
Volume resistivity: lXl012Ω
Thermal conductivity: 0.8 kcal / m / h ℃
Working temperature: -50 ~ + 260 ℃
Product Details:
Payment & Shipping Terms:
|
| Base Material: | Rogers 4003C Pcb | Product Name: | Rogers 4003C Laminate |
|---|---|---|---|
| Number Of Layers: | 2-Layer | Copper Thickness: | 1oz |
| Board Thickness: | Mechanical Drill: 8mil(0.2mm) | Surface Finishing: | HASL/HASL Lead Free/immersion Gold/ENIG |
| Min. Line Width: | 0.075mm(3mil) | Min. Line Spacing: | 0.1mm(4mil) |
| Min. Hole Size: | 0.1mm(4mil) | Rogers High Frequency PCB: | China Rogers 4003C Pcb Printed Circuit Board |
| Service: | One Stop Turnkey Service | SMT Efficiency: | QFP.SOP.QFN.PLCC.CHIP |
| Testing Service: | X-Ray/AOI X-Ray Function Test/Omron AOI/Solder Paste Testing | Rogers 4003 Application: | Telecommunications |
| High Light: | printed circuit board design,printed circuit board pcb |
||
2 Layer Laminate Rogers 4003C PCB Material High Frequency Circuit Boards
| Model: | XCEH | Origin: | Shenzhen |
|---|---|---|---|
| Size: | 8*9cm | Layer | 2 L rogers 4003 pcb |
| Brand: | XCE | Color: | Green |
Specification
Rogers 4003 pcb laminate in stock
The increasing complexity of electronic components and switches continually requires faster signal flow rates, and thus higher transmission frequencies. Because of short pulse rise times in electronic components, it has also become necessary for high frequency (HF) technology to view conductor widths as an electronic component.
Depending on various parameters, HF signals are reflected on circuit board, meaning that theimpedance (dynamic resistance) varies with respect to the sending component. To prevent such capacitive effects, all parameters must be exactly specified, and implemented with the highest level of process control.
Critical for the impedances in high frequency circuit boards are principally the conductor trace geometry, the layer buildup, and the dielectric constant (er) of the materials used.
For many applications, it is sufficient to use Rogers material with an appropriate layer buildup. In addition, we process high-frequency materials with improved dielectric properties. These have a very low loss factor, a low dielectric constant, and are primarily temperature and frequency independent.
Additional favourable properties are high glass transition temperature, an excellent thermal durability, and very low hydrophilic rate.
We use (among others) Rogers or PTFE materials (for example, Teflon from DuPont) for impedance controlled high frequency circuit boards. Sandwich buildups for material combinations are also possible.
Which widely be used for :
Automotive Antennas / RFID
Back-up Aids
Collision Avoidance
Low-Noise Block Downconverter (LNB)
Mobile Infrastructure Antennas
Point to Point Digital Radios
Power Amplifiers
High Reliability
Airborne Antenna Systems
Broadcast Satellites
Ground Based Radar Systems
Millimeter Wave Applications
Missile Guidance Systems
High Speed Digital
Rogers High frequency pcb material:
| Model | Parameter | thickness(mm) | Permittivity(ER) |
| F4B | F4B | 0.38 | 2.2 |
| F4B | 0.55 | 2.23 | |
| F4B | 0.225,0.3,0.5,08,1,1.2,1.5,2,2.5,3.0 | 2.65 | |
| F4Bk | 0.8,1.5 | 2.65 | |
| F4B | 0.8 | 3.5 | |
| FE=F4BM | 1 | 2.2 | |
| Rogers | RO5880 | 0.254 0.508 0.762 | 2.20 ± 0.02 |
| RO4350 | 0.254 0.508,0.8,1.524 | 3.5 | |
| RO4003 | 0.508 | 3.38 | |
| TACONIC | TLF-35 | 0.8 | 3.5 |
| TLA-6 | 0.254,0.8,1,1.5, | 2.65 | |
| TLX-8 | 0.254,0.8,1,1.6 | 2.55 | |
| RF-60A | 0.64 | 6.15 | |
| TLY-5 | 0.254,0.508,0.8 | 2.2 | |
| TLC-32 | 0.8,1.5,3 | 3.2 | |
| TLA-35 | 0.8 | 3.2 | |
| ARLON | AD255C06099C | 1.5 | 2.55 |
| MCG0300CG | 0.8 | 3.7 | |
| AD0300C | 0.8 | 3 | |
| AD255C03099C | 0.8 | 2.55 | |
| AD255C04099C | 1 | 2.55 | |
| DLC220 | 1 | 2.2 |
Some Typical Applications:
• Automotive radar applications
• Global positioning satellite
antennas
• Cellular telecommunications
systems - power amplifi ers and
antennas
• Patch antenna for wireless
communications
• Direct broadcast satellites
• Datalink on cable systems
• Remote meter readers
Our sufficient rogers material in stock:
Full thickness rogers laminate
Advantage
1. PCB factory directly
2. PCB Have the comprehensive quality control system
3. PCB good price
4. PCB quick turn delivery time from 48hours
5. PCB certification(ISO/UL E354810/RoHS)
6. 12 years experience in exporting service
7. PCB is no MOQ/MOV.
8. PCB is high quality.Strict through theAOI(Automated Optical Inspection),QA/QC,fly porbe ,Etesting
One stop PCB assembly services Samples in 2-3 days | Bulk orders in 1 week | 2-year warranties Complete OEM assembly performed in-house Handle all customer's needs for PCB assembly,
component purchasing, and other product assemblies
We quote for clients within 3 working days
Testing: PCBA in-circuit testing, PCBA function testing, AOI, X-ray inspection Experience range:
industrial, automotive, computing and storage And consumer, instrumentation, medical, networking, peripherals, telecommunications
Our product range covers various fields, i.e. consumer electronics, telecommunications, industrial products, auto mobile assemblies, medical equipments etc.
Our main services include electronics and metal, casing manufacturing, such as PCB fabrication, component purchasing, PCB assembly, plastic injection molding, high volume metal stamping, die-casting and custom fabrication.
