Introduction:
Heavy Copper PCB are printed circuit boards with 3 or more ounces of finished copper in the inner and/or outer layers.
While there is no standard definition of Heavy Copper, it is generally accepted that if 3 ounces (oz) of copper or more is used on the internal and external layers of a printed circuit board, it is called a heavy copper PCB. Any circuit with a copper thickness of more than 4 oz per square foot (ft2) is also categorized as a heavy copper PCB. Extreme copper means 20 oz per ft2 to 200 oz per ft2.
When the electronic device need high power or current through, Then we need consider heave copper to control the thermal on PCB
The benefits of heavy copper in PCBs:
Reduction of thermal strain
Better current conductivity
Can survive repeated thermal cycling
Smaller PCB size due to layering of copper
Increased connector site strength
Product Details:
Payment & Shipping Terms:
|
Base Material: | Rogers 4350B | Product Name: | Electronic Pcb/2K*4K Android Quad Core Motherboard/PCB Prototype/Electronic Circuit Board |
---|---|---|---|
Number Of Layers: | 2-Layer | Copper Thickness: | Inner 1/2 Oz-4oz;Outer 1oz-5oz |
Board Thickness: | Mechanical Drill: 8mil(0.2mm) | Surface Finishing: | HASL/HASL Lead Free/immersion Gold/ENIG |
Min. Line Width: | 0.075mm(3mil) | Min. Line Spacing: | 0.1mm(4mil) |
Min. Hole Size: | 0.1mm(4mil) | Rogers High Frequency PCB: | China Rogers Printed Circuit Board |
Service: | One Stop Turnkey Service | SMT Efficiency: | BGA.QFP.SOP.QFN.PLCC.CHIP |
Testing Service: | X-Ray/AOI X-Ray Function Test/Omron AOI/Solder Paste Testing | Application: | Industrial Control/Medical Device Consumer/Communications/Electronics Device/Unicycle/Computer Pcb |
High Light: | double sided pcb board,double side pcb |
24GHZ Rogers 4350 Double Sided Professional PCB Sensor Boards
Specification:
Number of layer: 2
Board size: 2.6*2.6cm
Panel size: 30*18cm
Color: Green solder mask black silk screen
Craft edge:yes
Surface finish: Immersion gold
Material: Rogers 4350 0.508mm
Gerber file: required
Microwave sensor knowledge:
The current civilian Doppler microwave sensors are operating in C-band (5.8GHz), X-band (10.525 / 10.687GHz) and K-band (24.125GHz), its transmit power less than 10 mW, are specified in the ITU You do not need to apply for the use of the frequency ISM band. Detection pattern omnidirectional and directional, depending on the antenna gain and transmit power, the detection range of 0.1 to 50 meters.
Microwaves emitted by the transmitting antenna, will be absorbed or reflected by the object is encountered, the power change. If the receiving antenna through the use of the object from the measured object or microwave reflected, and converts it into an electrical signal, and then processed by the measurement circuit, to achieve a microwave detection. Microwave sensors mainly by the microwave oscillator and the microwave antenna. Microwave oscillator is a device for generating microwaves. There are microwave oscillator device comprising klystron, magnetron or some solid elements. An oscillation signal generated by the microwave oscillator required waveguide transmission, and through the antenna out. In order to launch a consistent directional microwave antenna should have a special structure and shape.
Shenzhen XCEPCB have enough experience on 2.4G/5.8G/24ghz PCB production
High frequency rogers pcb introduce:
Model | Parameter | thickness(mm) | Permittivity(ER) |
F4B | F4B | 0.38 | 2.2 |
F4B | 0.55 | 2.23 | |
F4B | 0.225,0.3,0.5,08,1,1.2,1.5,2,2.5,3.0 | 2.65 | |
F4Bk | 0.8,1.5 | 2.65 | |
F4B | 0.8 | 3.5 | |
FE=F4BM | 1 | 2.2 | |
Rogers | RO5880 | 0.254 0.508 0.762 | 2.20 ± 0.02 |
RO4350 | 0.254 0.508,0.8,1.524 | 3.5 | |
RO4003 | 0.508 | 3.38 | |
TACONIC | TLF-35 | 0.8 | 3.5 |
TLA-6 | 0.254,0.8,1,1.5, | 2.65 | |
TLX-8 | 0.254,0.8,1,1.6 | 2.55 | |
RF-60A | 0.64 | 6.15 | |
TLY-5 | 0.254,0.508,0.8 | 2.2 | |
TLC-32 | 0.8,1.5,3 | 3.2 | |
TLA-35 | 0.8 | 3.2 | |
ARLON | AD255C06099C | 1.5 | 2.55 |
MCG0300CG | 0.8 | 3.7 | |
AD0300C | 0.8 | 3 | |
AD255C03099C | 0.8 | 2.55 | |
AD255C04099C | 1 | 2.55 | |
DLC220 | 1 | 2.2 |
Basic information:
Place of Origin: | China |
Brand Name: | XCE |
Model Number: | XCEC-4 |
Port | Shenzhen,HongKong |
Minimum Order Quantity: | 1pcs |
Price: | Please send gerber file for accurate price |
Packaging Details: | Inner:vacuum packed bubble bag Outer:carton box |
Delivery Time: | 3-8 days |
Payment Terms: | T/T,western union,paypal,L/C |
Supply Ability: | 1, 000, 000PCS/week |