 |
|
|
|
|
Introduction:Rogers high frequency pcb widely used in the area of high technologies like communication device,Electronics,Aerospace,Military industry and so on. we have accumulated abandunt experiences in the line of high frequency microwave business for which widely apply to power divider,combiner,power amplifier,line amplifier,base station,RF antena,4G antena etc.
Sufficient stock:
We have sufficient rogers material raw as follow:RO4003C、RO4350B、RO4360、RO4533、RO4535、RO4730、RO4232、RO4233、RO3003、RO3006、RO3010、RO3035、RO3203、RO3206、RO3210、RO3730、RO5780、RO5880、RO6002、RO3202、RO6006,Frequently-used is 4003C,4350B,5880
So we can do pcb circuit board with your detail requirements in the case of you send us gerber files or any other files
Product Details:
Payment & Shipping Terms:
|
| High Light: | fr4 circuit board,Custom Printed Circuit Board |
||
|---|---|---|---|
Radar Sensor 5.8G FR4 PCB Voice Control Light High Sensitivity Circuit Board
Specification:
Induction/sensor lamp is using imported technology and MCU circuit design, active infrared work type, have good stability, strong anti-interference characteristics, with infrared decoding, widely used in high demanding commercial and industrial applications. It is a new generation of green energy-saving lighting.
With induction control switch lights, needn't to manually operate, for example, voice control, light control, temperature control, etc. all belong to the induction lamp
Board size: 4*2cm
Thickness: 0.8MM
Surface finish: Lead free
Material: FR4
Copper thickness: 1OZ
Technology:
Use launch&receive active infrared technology, integrated codec launch, decodes received control output, making powerful with 8-bit microcontroller, using industrial level chip, load capacity, strong anti-jamming capability, suitable for any place.It can turn on lighting automatically ,and delay off automatically after people leave, eliminate human waste of energy, and extend the service life of electrical energy, convenient security in one of the function.
It is actually an automatic switching control circuit
Parameter:
|
Type |
Manufacturer |
|
Line width/space |
10 Mils or Greater |
|
Drill Clearance |
0.2mm |
|
Plated Slots |
0.036 or Greater |
|
Smallest Hole |
0.1mm or Greater |
| Test Jig |
One-off |
|
Tooling |
Yes |
|
Soldermask Type |
LPI Glossy, LPI-Matte, SR1000 |
|
Soldermask Color |
Green, Red, Blue, Black, White, Yellow, |
|
Silkscreen Color |
White, Yellow, Black, Red, Blue |
|
CNC Route Point |
Any |
|
Minimum Route Width |
0.031” |
|
Scoring |
Straight Lines, Jump Scoring, Panel Edge to Edge, CNC* |
|
Body Gold |
HARD*, IMMERSION* (up to 50 MICRON GOLD) |
|
Data File Format |
Gerber 274x with embedder aperture |
|
Fab. Drawing Format |
DXF, HPGL, DWG, PDF, Gerber |
|
E.T Testing |
Flying Probe, Single Sided, 1up Plate, Clampshell, Net List |
|
Counter Sink / Counter Bore |
Availiable up to 0.250 Diameter |
Based on infrared technology, automatic control products, when someone enters into range of switch sensing, special sensors to detect changes in the infrared spectra of the human body, the switch connect the load automatically. People do not leave, and at the event, switch continuous conduction; people left, switch time delay automatic shut down load, people come light on, people leave lights out, friendly convenience, safety and energy conservation.
