High frequency pcb widely used in Mobile communication products,
amplifier, low noise amplifier,GSM, CDMA, 3G smart antenna,splitters, diplexers, filters, couplers and other passive components, Performance:low loss,high dielectric constant and stable,can provide a small size sheet
PTFE + woven glass
Dielectric constant (DK): 2.55,2.65,2.75,2.85,2.95,3.00,3.30,3.50
Loss tangent (DF): 0.0030@10GHz
Copper adhesion: 12ibs / inch
Water absorption: ≤0.02%
Surface resistance: 1X1016 Ω
Volume resistivity: lXl012Ω
Thermal conductivity: 0.8 kcal / m / h ℃
Working temperature: -50 ~ + 260 ℃
Payment & Shipping Terms:
|Material:||High Frequency Material||Layer:||2|
|Color:||/||Min Line Space:||4mil|
|Min Line Width:||4mil||Copper Thickness:||1OZ|
Rogers Arlon Taconic Radio Frequency Microwave Rfmw Pcb Double Layer Immersion Silver Surface
High frequency pcb high-performance insulating material for microwave, radio frequency (RF) and high-speed digital signal processing (DSP) market with PTFE/type woven glass fiber fabric sheet.This material can be applied to LNAs LNBs, PCS/PCN antenna system, global positioning system (GPS) and UMTS antenna system,And the power amplifier, passive components, collision avoidance radar system, aviation help guide remote control technology and system of the phased array radar.
High frequency materials are UL 94V-0 rated for active devices and high power RF designs.
|Board size: 8.7*5.5cm|
|Cu thickness: 35UM|
|Material: High Frequency Material|
|Min line space&width: 4Mil|
The basic characteristics of high-frequency substrate materials require the following:
(1) Dielectric constant (Dk) must be small and very stable, usually the smaller the better the signal transmission rate and the material dielectric constant
Of the square root is inversely proportional to the high dielectric constant easily lead to signal transmission delay.
(2) dielectric loss (Df) must be small, which mainly affects the quality of signal transmission, the smaller the dielectric loss of the signal loss is also smaller.
(3) and the thermal expansion coefficient of copper foil as much as possible, because inconsistencies in the hot and cold changes caused by copper foil separation.
(4) water absorption is low, high water absorption will affect the dielectric constant and dielectric loss.
(5) Other heat resistance, chemical resistance, impact strength, peel strength, etc. must also be good
Is a plate, the material is characterized by a superior dielectric constant temperature stability,
dielectric constant thermal expansion coefficient and copper foil is very consistent, to improve the PTFE substrate.
This product is ideal for applications where the ambient temperature is rapidly changing (aerospace)
and can be used for higher frequency and multilayer structure due to its low dielectric loss and high reliability of metallized vias
High Frequency PCB Board Rogers Arlon Taconic Radio Frequency Microwave RFMW PCB
Key Specifications/Special Features:
Number of layers: 2L
Base-material: High frequency material
Thickness: 0.8 mm+/-10%
Blind and buried via: Yes
Min. Drill hole: 0.25mm
Min. Line space: 0.127mm
Min. Line width: 0.127mm
Mech. treatment: Routing
Surface treatment: Immersion Silver
100% E-test: Yes
Reasonable price and professional services.
UL,SGS,ISO9001,ISO14001,RoHS and ISO TS16949
1. OEM&ODM are availble, different shape for your choice
2. Programmable, it can change different colors and lighting ways
3. Green and Energy saving, best for your lighting project
Why choose us
1. Your inquiry related to our products or prices will be replied in 24hrs.
2. Well-trained and experienced staffs to answer all your enquires in fluent English
3. OEM&ODM, any your customized lightings we can help you to design and put into product.
4. Distributorship are offered for your unique design and some our current models
5. Protection of your sales area, ideas of design and all your private information
1. Payment: T/T in advance (Western Union is welcomed)
2. Production lead time 100PCS: 5-7days, 500~1000PCS: 7-10days, above 1000PCS 15-20days.
3. Sample can be delivered in 3days
4. Shipping freight are quoted under your requests
5. Shipping port: Shenzhen, Mainland China
6. Discounts are offered based on order quantities
7. MOQ: 1PC